JUTAIPEEK®NA is a type of Polymeric Profiles made from pure Polyetherether Ketone (PEEK), including sheets and rods, and the color is generally rice-yellow.(JUTAIPEEK®NAV is an extruded profile using British VICTREX PEEK Polymers 450G raw materials, and JUTAIPEEK®NAG is an extruded profile using domestic raw materials) Pure PEEK is a kind of polymeric materials with outstanding heat-resistance (long term service temperature=240 -260℃), outstanding resistance to chemicals (almost only concentrated H2SO4, HNO3 can destroy it), excellent flame retardancy and low smoke toxicity when combustion.
Product Features
JUTAIPEEK®NA type pure PEEK profiles:

● Outstanding stiffness and mechanical strength.
● Excellent resistance to creep and fatigue.
● Maintaining higher tensile strength and flexure strength、 above 200℃.

● Outstanding heat-resistance with long term service temperature is 240-260℃.
● Outstanding electrical insulation, low dielectric constant and dielectric loss.
● Outstanding resistance to chemicals.
● Excellent resistance to hot water and steam, which can be serviced long term in steam with temperature above 200℃.
● Excellent flame retardancy, which reach UL94 V-0 class for 1.6mm thickness sample.
● Low smoke generation.
● Outstanding resistance to nuclear radiation, which has the best radiation-resistance in Polymeric materials.
● Good sliding frictional property, which has better friction factor and wear rate than most of other kinds of polymeric polymers.

Application Fields
JUTAIPEEK®NA type PEEK profiles can be applied:
—— Mechanical Engineering Industry;
—— Pump and Vale Industry;

—— Electronic Industry;

—— Chemical Industry;
—— New Energy Industry;

—— Food and Medical Device Industry;
—— Automobile Industry;
—— Aviation and Aerospace industry.
Instructions for Use
Machined by Lathes or Milling Machine. Remove surface.
heat-treatment aged layers and the thickness of removal layer is 0.5-1mm.
Product Storage Instructions
Placed away from light, avoiding humid, and away from oily substance.
Packed with polymeric film when not use.
Product Technical Data
The performance of JUTAIPEEK®NA series products is as follows:

Performance Test Method Unit NAG NAV
Color Eye / Rice-Yellow Rice-Yellow
Density ISO 1183-1 g/cm³ 1.30 1.30
Tensile Strength ISO 527-2 MPa ≥105 ≥105
Tensile Modulus ISO 527-2 GPa ≥4.0 ≥4.0
Elongation At Break ISO 527-2 % ≥15 ≥25
Notched Charpy Impact Strength ISO 179 KJ/m² ≥5.6 ≥4.5
Flexural Strength ISO 178 MPa ≥160 ≥165
Flexural Modulus ISO 178 GPa ≥4.0 ≥4.0
Rockwell Hardness ISO 2039-2 HRM ≥100 ≥100
Thermal Conductivity ISO 8302 W/ (m•K) ≤0.5 ≤0.5
Coefficient of Linear Thermal
Expansion 20-100℃

ISO 11359-2 10-6/K ≤65 ≤65
Long Service Temperature UL 746B 240 240
Heat Deflection Temperature ISO 75-2 ≥150 ≥150
Water Absorption

ISO 62 % ≤0.05 ≤0.05
Flame Retardancy UL 94 / V-0 V-0
Volume Resistivity IEC 62631-3-1 Ω•cm 1011-1013 1011-1013
Dielectric Strength IEC 60243-1 kV/mm ≥15 ≥15
Dielectric Constant IEC 60243-1 1 3.66 3.3
Dielectric Loss IEC 60243-1 1 2.5*10-3 2.7*10-3
Chemical Corrosion Resistance
JUTAIPEEK®NA can maintain excellent chemical tolerance and mechanical property under considerably wide temperature range, with generally seldom expansion or color fade. The chemical corrosion resistance of JUTAIPEEK®NA is demonstrated in Table 5.

50%Acetamide, Formamide and Other Amide +
40% HF -
Acetone, Cyclohexanone, MEK and Other Ketones


Liquid Freon
10%Ammonia, Cyclohexamine and Other Amines. +
Urea Solution
Gasoline, Diesel, Fuel, Asphalt

Benzene, Toluene and Other Aromatic hydrocarbons

Potassium hydroxide solution
Acids such as 10% Acetic acid, 10% Formic acid,Concentrated phosphoric acid, 10% Nitric acid, 10% Hydrochloric acid, 10% Sulfuric acid, etc.

1% potassium permanganate


10% Calcium chloride, 10% Calcium carbonate, 10%Sodium nitrate, 10% Sodium thiosulfate and Other Salts 10% Hydrochloric acid, 10% Sulfuric acid, etc.


Phenol solution

96% Ethanol, Ethylene glycol, Glycerol, 40% Ethylene glycol solution, Methanol, Propanol and Other Alcohols


Pyridine +

Salicylic acid
Hexane, Heptane, Octane, Isopropane and Other Alkanes

30% Formaldehyde solution and other Aldehydes +

98% carbonate solution
10% Boric acid aqueous solution +
Saturated hydrogen sulfide solution

Chlorobenzene 0 Silicone oil

Chloroform +

Dichloro heterocyclic hexane +

Concentrated acetic acid 0 THF

Diethyl ether +

Smoke, Toxicity, Corrosion
Plastic combustion generates a series of toxic gases, such as hydrogen cyanide (HCN), sulfur gases (SO2, H2S), nitrogen gases (NO, NO2) and carbon monoxide (CO). These gases are more lethal than fire because they can render people incapable of escaping from the fire scene. Corrosive gases such as hydrogen fluoride (HF) and hydrogen chloride (HCl) can cause permanent damage to sensitive electronic devices.

The combustion products of JUTAIPEEK are mainly carbon dioxide (CO2) and carbon monoxide (CO). The amount of carbon monoxide produced is even less than 5% of the limit value specified in the Aviation Toxicity Standards (e.g. Boeing BSS 7238 and Airbus ATS-1000).

The toxicity of gases is usually measured based on the amount of gases that cause fatal damage to the human body. Table 2 is the test results of the National Bureau of Standards (NBS) Smoke Laboratory, which confirms that the only toxic gas produced considerably is carbon monoxide(CO).

Table below: The National Bureau of Standards (NBS) smoke laboratory tests the toxicity of combustion gases

  Flameless test [ppm] Flame test [ppm] Max allowable
concentration [ppm]
  After 90s After 4Mins After 90s After 4Mins After 90s After 4Mins
CO Smallest 1 30 100 3000 3500
HCI 0 0 0 0 50 500
HCN 0 0 0 0 100 150
H2S,SO2 0 0 0 0 50 100
NOx 0 0 0 0 50 100
HF 0 0 0 0 50 50
Menu Tel Contact